| 1. | Design criteria for interor devices of industrial boiler drum
工业锅炉锅筒内部装置.设计导则 |
| 2. | Specification for boiler drum internals
锅炉蝈筒内部装置.技术条件 |
| 3. | Technical guide of welding repair for boiler drum in fossil - fired power plants
火力发电厂锅炉汽包焊接修复.技术导则 |
| 4. | Finite element analysis of three dimensional transient stress in 300mw boiler drum
锅炉汽包的三维瞬态应力有限元分析 |
| 5. | The code of inspection and evaluation for existing boiler drum in fossil - fuel power plants
在役电站锅炉汽包的检验及评定规程 |
| 6. | And then a software system was developed under visual c - r environment for evaluation the fatigue life of boiler drum
最后本文用visualc + +开发一套适用于锅炉承压部件(汽包为代表)的疲劳寿命评估分析系统。 |
| 7. | On the basis of all these research , the method of low - cycle fatigue life analysis and estimation for 4 lot / h boiler drum was set up
在上述研究的基础上，建立了410t / h锅炉汽包的低周疲劳寿命分析与预测的方法。 |
| 8. | Fatigue failure in the power plant boiler drum and pressure piping is the common failure , which caused by fatigue loading and others
锅炉承压部件(汽包等)及压力管道在交变载荷和其它因素作用下发生疲劳破坏是一种常见的失效方式。 |
| 9. | A large deviationoccurred when measuring water level on the left and right sides of unit 3 boiler drum inzhujiang power plant , which seriously impacted the safety of heating equipment
珠江电厂3号机锅炉汽包左右侧水位测量偏差大，严重影响了热力设备的安全运行。 |
| 10. | Stress concentration measure on the model of boiler drum with two nozzles was executed and the testing results were compared with the asme criterion , experiential value and the value of finite element method respectively . this measurement result provides direction for evaluation of stress amplitude
设计模拟汽包进行应力测试，并与美国asme规范和经验公式计算值、有限元计算结果进行比较，为后续的低周疲劳寿命估算时交变应力幅值的确定提供依据。 |
